|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Fri, March 26th, 2010, 10:56 AM
|
||||
|
||||
Stumble/Miss/Hesitation
Has anyone experienced a stumble/miss/hesitation with their Gryphon. Occasionally, I can just be driving down the road and get a terrible feeling. Its like I have a coil pack out or something. There is no rhyme or reason as to what sets it off, it just does it and the only thing that fixes it is pulling over and turning the truck off and restarting.
 I tried setting the truck back to stock and ran it that way for several weeks and everything was fine. This usually happens at least once a week with the programmer on the truck. Any ideas?!?! 2006 5.4 |
|
#2
Fri, March 26th, 2010, 06:44 PM
|
||||
|
||||
|
No ideas at all, but the fact that it runs fine at stock makes me suspect the tune, as I'm sure you do. I think Bill is going to have to be the one to fix this.
- Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#3
Sat, March 27th, 2010, 06:09 PM
|
||||
|
||||
|
I thought I had heard of someones acting similar before but could not find the post. Maybe it was the torque converter "shuttering" that I am thinking of. I am not sure if it is the same thing or not. It really feels like a coil pack is unplugged. I have tried to contact PHP by phone several times regarding the issue but have not had any luck. Hopefully Bill will see this post.... Bill??
|
|
#4
Sun, March 28th, 2010, 12:41 AM
|
||||
|
||||
|
There have been some cases of part throttle suddering of the torque convertor engaugement while going back up a hill after coming down from one.
Mine was from using coast button on the cruise control. How many miles on the truck?
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#5
Mon, March 29th, 2010, 09:53 PM
|
||||
|
||||
|
69,xxx
It seems like it may always start with a coast and part throttle type driving. It did it again today and I let off the gas and got back in it and it went away. I was kind of excluding the torque converter as before even making it downshift would not make it go away. Only turning the truck on and then back off would. Keep the ideas coming..... Can a mod point Bill to this thread? |
|
#6
Tue, March 30th, 2010, 12:33 AM
|
||||
|
||||
|
Quote:
Peace! 
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#7
Tue, March 30th, 2010, 03:15 PM
|
||||
|
||||
|
Thank you.
|
|
#8
Wed, March 31st, 2010, 06:21 PM
|
||||
|
||||
|
I know they are busy but any idea the best way to get a hold of them?
|
|
#9
Wed, March 31st, 2010, 08:13 PM
|
||||
|
||||
|
Yes they are awfully busy!!!!!!
Try and call them and not just once or twice. Try a lot. Or fax them a note.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#10
Mon, April 5th, 2010, 12:32 PM
|
||||
|
||||
|
Still no luck!
|
|
|
Linear Mode
