Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Minotaur Automotive Tuning Software

Minotaur Automotive Tuning Software
Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here.

Also, check out our Facebook group: Facebook - Minotaur Tuners


Reply
 
Thread Tools Display Modes
  #1  
Old Tue, July 6th, 2010, 08:30 PM
Pocket Pocket is offline
Bacon King
 
Join Date: Oct 2009
Location: Parker, CO
Posts: 95
Pocket is on a distinguished road
Default Throttle AD counts question

Under parameters I noticed two settings and was wondering what, if anything, they do... and what would happen if they were changed.

Closed throttle default: 250 AD counts
Full throttle default: 676 AD counts

I'm wondering if changing these (particularly the full throttle default) if I can get a better range of control with my pedal, especially under the MFD table, or if these have any bearing on the MFD table at all.

Thoughts?

I'm going to try changing the full throttle default count and see what happens, but just wanted to see if anyone else has messed with these yet.
Reply With Quote
  #2  
Old Wed, July 7th, 2010, 01:06 AM
F-127's Avatar
F-127 F-127 is offline
Tuner novice
 
Join Date: Feb 2009
Location: West Central MN
Posts: 199
F-127 is on a distinguished road
Default

Hmm, well I can tell you that I honestly didn't know the answer until you asked. So I opened up Minotaur to see if I could investigate. While you have a project open and have the project window selected, you can select "Mark" on the toolbar and then pick Help. This will bold different variables that help information has been filled in on. Closed and Full Throttle defaults happen to be bolded. You can then select the bold item in its respective parameter, map, function window and press F1. These happen to say "This is the default value used when a sensor error has been detected." Now what causes the PCM to think there is a sensor error I'm not sure.
__________________
Thomas H.
'97 F-250 CCSB 7.3L Auto, Gauges, Modded H2E, 285/200% sticks, 7.3L IC, Stealth Dual HPOP, Pheonix chip
'03 F-250 CCSB 6.0L Auto, Gryphon CTS, FICM tuning by PHP, Powermax
Reply With Quote
  #3  
Old Wed, July 7th, 2010, 11:28 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,654
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Those are sensor error defaults. If the APP sensor is open or shorted, these are the minimum and maximum values that are allowed.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #4  
Old Wed, July 7th, 2010, 01:56 PM
Pocket Pocket is offline
Bacon King
 
Join Date: Oct 2009
Location: Parker, CO
Posts: 95
Pocket is on a distinguished road
Default

Ok, that makes sense. Thanks for the info guys!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:01 PM.


All Contents Copyright 2008-2024, Power Hungry Performance