Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford Super Duty & Excursion > 2003 to 2007 6.0L Power Stroke Diesel

2003 to 2007 6.0L Power Stroke Diesel
6.0L Power Stroke Diesel equipped Super Duty and Excursion.


Reply
 
Thread Tools Display Modes
  #11  
Old Sun, July 25th, 2010, 12:43 AM
sonic blue l sonic blue l is offline
Double Whopper
 
Join Date: Dec 2008
Location: Alberta, Canada
Posts: 32
sonic blue l is on a distinguished road
Default

remove your dummy plug and see if your o rings are burnt off of it.

Btw your calibration should not matter, i have 2 04 6l, one a 03 engine, one a 04. both have up pipe welded shut, egr valves in place. 03 will learn vgt profile with nor problem, and the 04 build boost as normal. Both have the latest calibrations.
Reply With Quote
  #12  
Old Sun, July 25th, 2010, 12:27 PM
MJ365 MJ365 is offline
Whopper
 
Join Date: May 2010
Location: Duluth, MN
Posts: 20
MJ365 is on a distinguished road
Default

I just put new o-rings on it the last time I changed it out because I thought the same thing and it didn't help anything.
__________________
2004 F-350 XLT 6.0 Diesel 4X4 04/04 Build
PHP FICM & Rolled Back ECM/TCM
Reply With Quote
  #13  
Old Sun, July 25th, 2010, 02:34 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
 
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default

Have you taken a look at the MAF sensor?

I was playing with a 6.0 a while back and it was doing some really strange VGT/ EGR stuff, so just for giggles popped out the MAF and cleaned all the crap from the K&N off of it and the truck ran perfect afterwords.


Just an idea.
Reply With Quote
  #14  
Old Mon, July 26th, 2010, 01:11 AM
MJ365 MJ365 is offline
Whopper
 
Join Date: May 2010
Location: Duluth, MN
Posts: 20
MJ365 is on a distinguished road
Default

I just cleaned my MAF for peace of mind. I run a stock filter and the MAF looked nice and clean to begin with. Datalogging with my old defunct predator I can watch when the egr flow test fails and sets p0401.
__________________
2004 F-350 XLT 6.0 Diesel 4X4 04/04 Build
PHP FICM & Rolled Back ECM/TCM
Reply With Quote
  #15  
Old Wed, August 25th, 2010, 05:05 PM
MJ365 MJ365 is offline
Whopper
 
Join Date: May 2010
Location: Duluth, MN
Posts: 20
MJ365 is on a distinguished road
Default

Figured out that my problem is there isn't an problem. Had to pull my car trailer with my fast truck on it and on a big hill I booted it and it makes 29psi no problem with a good load on it. Also got .5 mpg better with it blocked off towing and no lag at all taking off from stops. I now know that I can properly delete it without issue. Thanks for the help.
__________________
2004 F-350 XLT 6.0 Diesel 4X4 04/04 Build
PHP FICM & Rolled Back ECM/TCM
Reply With Quote
  #16  
Old Tue, September 21st, 2010, 01:42 AM
SICKS-O SICKS-O is offline
SICKS LITER RACING
 
Join Date: May 2010
Location: Salem, NH
Posts: 26
SICKS-O is on a distinguished road
Default

less boost with an egr cooler delete, block off plate, dummy valve, etc is normal. when the egr system is in place and operating properly manifold gauge pressure will be higher then when there is no egr flow. its a complicated answer but basically the volume and pressure of the exhaust that is recirculated back into the intake manifold addes to the overall boost pressure.
Reply With Quote
  #17  
Old Tue, September 21st, 2010, 04:09 PM
MJ365 MJ365 is offline
Whopper
 
Join Date: May 2010
Location: Duluth, MN
Posts: 20
MJ365 is on a distinguished road
Default

I never thought of that. Makes perfect sense to me now that you bring it up. Thanks for the info.
__________________
2004 F-350 XLT 6.0 Diesel 4X4 04/04 Build
PHP FICM & Rolled Back ECM/TCM
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:51 PM.


All Contents Copyright 2008-2024, Power Hungry Performance