Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford Super Duty & Excursion > 2003 to 2007 6.0L Power Stroke Diesel

2003 to 2007 6.0L Power Stroke Diesel
6.0L Power Stroke Diesel equipped Super Duty and Excursion.


Reply
 
Thread Tools Display Modes
  #1  
Old Wed, October 27th, 2010, 02:00 AM
Ford62B Ford62B is offline
Whopper Junior
 
Join Date: Sep 2010
Posts: 2
Ford62B is on a distinguished road
Default Custom Tunes & EPB Sensor Strategy...???

Hello to everyone in the Good 'Ol USA:

Jonathan "Cooter" Carlson here form the country of Afghanistan with a question on custom tuning for my 2004 Ford F350 6.0L Diesel (which is sadly back in the States ):

1) Does the calibration use a exhaust pressure sensor feedback strategy? I have heard that later calibarations do not use EBP feedback in engine performance- which is more preferable?

2) Can my intake be adjusted? I am installing a 4in diameter intake and need to know if they increased surface area can be taken into account in the programming.

3) I am installing a custom made external oil cooler (Goodbye nasty Ford internal oil cooler!!); can the error code for more than a ten degree difference between oil temp and coolant temp be removed from custom calibrations? I've been told that if not the ECM will retard the motor from making higher levels of power.

Thank you everyone who can shed some light on this; I am in the process of buying parts for the truck (Garrett POWERMAX turbo, 155CC injectors, custom made water/meth system). Just because I am deployed doesn't mean I can't enjoy my truck!!

Thanks!!
Jonathan
Reply With Quote
  #2  
Old Fri, October 29th, 2010, 08:24 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 206
Jeremy is on a distinguished road
Default

I'll try to get Bill or Cody to answer this.
Reply With Quote
  #3  
Old Mon, November 1st, 2010, 05:16 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,654
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Quote:
Originally Posted by Ford62B View Post
Hello to everyone in the Good 'Ol USA:

Jonathan "Cooter" Carlson here form the country of Afghanistan with a question on custom tuning for my 2004 Ford F350 6.0L Diesel (which is sadly back in the States ):

1) Does the calibration use a exhaust pressure sensor feedback strategy? I have heard that later calibarations do not use EBP feedback in engine performance- which is more preferable? The rollback strategy will use the EBP sensor instead of the inferred strategy that the newer calibrations use. Using the sensor for an actual input is more preferred.

2) Can my intake be adjusted? I am installing a 4in diameter intake and need to know if they increased surface area can be taken into account in the programming. There is no need to adjust the tuning for intake systems unless your mass airflow sensor is having issues with the intake tube design.

3) I am installing a custom made external oil cooler (Goodbye nasty Ford internal oil cooler!!); can the error code for more than a ten degree difference between oil temp and coolant temp be removed from custom calibrations? I've been told that if not the ECM will retard the motor from making higher levels of power. I am unable to answer that and I am also unaware of that phenomenon. I assume that Bill has control over that though so it shouldn't be a problem.

Thank you everyone who can shed some light on this; I am in the process of buying parts for the truck (Garrett POWERMAX turbo, 155CC injectors, custom made water/meth system). Just because I am deployed doesn't mean I can't enjoy my truck!!

Thanks!!
Jonathan
Answered to the best of my ability in red above.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #4  
Old Mon, November 1st, 2010, 09:29 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 206
Jeremy is on a distinguished road
Default

The 10 degree delta was added to the latest calibrations from ford, if you roll back you don't have to worry about it.
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #5  
Old Tue, November 2nd, 2010, 12:58 AM
SICKS-O SICKS-O is offline
SICKS LITER RACING
 
Join Date: May 2010
Location: Salem, NH
Posts: 26
SICKS-O is on a distinguished road
Default

you may or may not have an inferred ep calibration the only way to know for sure is if you have access to a device that will read the ecms current calibration code.

out of curiousity is your 2004 truck an early or late 04 model? sounds like you are on the right path with your modifications, the powermax turbo and 155s will work well together. have you looked into an egr cooler delete or block off kit? it would be a good idea, esp with the modifications you are planning.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:52 PM.


All Contents Copyright 2008-2024, Power Hungry Performance