Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > 6.0L PSD FICM Reprogramming

6.0L PSD FICM Reprogramming
Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years.

If you have questions or would like more information about the benefits, please post here.


Reply
 
Thread Tools Display Modes
  #1  
Old Sun, September 11th, 2011, 06:03 PM
fishmanwill fishmanwill is offline
Whopper
 
Join Date: Nov 2010
Posts: 10
fishmanwill is on a distinguished road
Default no difference in mpg after rollback.....?

I had the FICM and ECM rolled back a couple of weeks ago. I am very pleased with how the truck runs now and glad that the post shut-down injector buzz is gone. The truck runs good and it seems to be smoother.
I have put about 1,000 miles on the truck since then and only have one thing I dont like and that is that my MPG did not increase at all. Everything is maintained on the truck and up to date. The tires are properly inflated. I have recently cleaned the EGR valve, I searched on here and found the EBP sensor can cause problems, I cleaned the sensor and the tube. I drive the truck under 2,000 rpms. I dont know what else to do. Is there someting else I can check or do to increase the MPG, I am still only getting 12-13 MPG. Thank you for the help and hopefully I can get a few more MPG's out of this truck.

William
__________________
2004 F-350 Crew Cab FX4 with 80,000 miles
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:03 PM.


All Contents Copyright 2008-2024, Power Hungry Performance