Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford Super Duty & Excursion > 2003 to 2007 6.0L Power Stroke Diesel

2003 to 2007 6.0L Power Stroke Diesel
6.0L Power Stroke Diesel equipped Super Duty and Excursion.


Reply
 
Thread Tools Display Modes
  #1  
Old Thu, November 10th, 2011, 02:57 PM
Windrunner408 Windrunner408 is offline
Whopper Junior
 
Join Date: Nov 2011
Posts: 2
Windrunner408 is on a distinguished road
Default Vehicle Strategy Question

I have a question that I am not sure deals with a vehicle's strategy or not but am hoping can be answered here. I have a 2006 F350 with a 6.0L. I have an egr delete, exhaust, intake, head studs, and VXCF4HB strategy.

What I am noticing is that when I am cruising down the hwy at say 70 mph and the Intake Air Temp reaches 85*F, it feels like my engine starts to defuel and the cruising boost level goes up about 3 psi and my EGTs actually drop about 50*F.

My question is, IS this being caused by my vehicle strategy such that when the PCM sees the higher IATs that it automatically defuels to protect the engine or is it some other problem like a sensor that is malfunctioning?

I ask because I see PHP does PCM reflashes and am wondering if reflashing to a different strategy would solve this problem. Any help would be greatly appreciated.
Reply With Quote
  #2  
Old Thu, November 10th, 2011, 04:16 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 206
Jeremy is on a distinguished road
Default

I can't help with the issue your having, but you have the best PCM calibration that was available. PHP rolls back most of the 05-07 PCM to the VXCF4.
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #3  
Old Thu, November 10th, 2011, 04:52 PM
Windrunner408 Windrunner408 is offline
Whopper Junior
 
Join Date: Nov 2011
Posts: 2
Windrunner408 is on a distinguished road
Default

Well it is good to know that I have a good PCM calibration but would really like to know what could be causing this condition.

What has me baffeled is it acts like a switch. When the OAT/IAT is less than 80*F, i.e. 79*F, the truck runs like it has all the power in the world but when the OAT/IAT hits 80*F or goes higher, it runs like it isnt getting enough fuel and is boosting the piss out of the turbo and am just wondering if this is the PCM protecting the motor or something else causing this.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:19 AM.


All Contents Copyright 2008-2024, Power Hungry Performance