|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Tue, May 29th, 2012, 02:18 PM
|
|||
|
|||
Got my Gryphon back...same problem :((
I just got my Gryphon back from warranty work about my screen fading and it worked fine for like a day and now i can't hardly read the numbers....I was told over the phone the whole unit was going to be replaced but when I got it back and the serial number was the same so I figured that they found a way to fix it......I sent it in before my one year warranty and now its passed...so I need to send it back again because I really need my programmer...am I going to have to pay for repiars now???
Thanks.
__________________
|
|
#2
Tue, May 29th, 2012, 04:07 PM
|
||||
|
||||
|
I wouldn't think you would have to pay for a repair that didn't work, but you'll have to get the REAL answer from Edge.
- Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#3
Tue, May 29th, 2012, 09:29 PM
|
||||
|
||||
|
I left Bill a note, there could have been a mix up and the wrong programmer was sent back to you.
__________________
|
|
#5
Sun, June 3rd, 2012, 03:06 AM
|
|||
|
|||
|
I've noticed a few others having the same problem. Here more recently i have come across the same issue. When i go through settings to change the contrast i just bump it up one and all of the sudden the screen is fine. Strange. I just wonder if sunlight has anything to do with it.
|
|
#6
Sun, June 3rd, 2012, 11:14 AM
|
||||
|
||||
|
This happens every year around this time when temps start to rise. Let the units cool down rather than adjust settings.
__________________
|
|
#7
Wed, June 13th, 2012, 08:57 AM
|
|||
|
|||
|
Ok thanks Longshot! I have another question now...my tune might be messed up...I have INSTANT ECON on and I was pulling a 5,000lb trailer the other day and when I would give it gas its would read like 52MPG and when I would let off and it would read 4MPG....just wondering! THanks!
__________________
|
|
#9
Mon, June 18th, 2012, 08:51 AM
|
||||
|
||||
|
Don't ever watch Instant Economy. Put it on LOAD (Engine load). Do some driving and report back.
__________________
|
|
|
Linear Mode
