Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > 6.0L PSD FICM Reprogramming

6.0L PSD FICM Reprogramming
Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years.

If you have questions or would like more information about the benefits, please post here.


Reply
 
Thread Tools Display Modes
  #1  
Old Mon, June 4th, 2012, 11:37 AM
Cajunrgfm Cajunrgfm is offline
Whopper
 
Join Date: Jun 2012
Location: Ottawa, Canada
Posts: 19
Cajunrgfm is on a distinguished road
Default Ficm tune, is it for me ?

04 f-550,4x4, k8 super tow pkg. dana 135 4.88 t-lok. 04.5 6.0,auto. I have read most all bills posts on all the psd forums,and have a cts Evo on power level 2. Runs great, truck has new heads and gaskets a year ago, egr delete , cat elc and blue spring. 170k miles, recet hpop, stc, dummies and ipr. Change oil @3k. My ficm is healthy at 48-49.5v. But is dealer programmed.Batteries run at 13.8 v. New m'craft. Is a custom tune and ficm better for my engine/trans.?? Tks.
Reply With Quote
  #2  
Old Tue, June 5th, 2012, 12:26 AM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 206
Jeremy is on a distinguished road
Default

I haven't tried a ficm program in a 450 or 550 yet, but i would think they would do really well with a nice ficm program. Probably the Atlas 40, because of the the potential weight these truck can haul and tow.
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #3  
Old Tue, June 5th, 2012, 07:27 AM
Cajunrgfm Cajunrgfm is offline
Whopper
 
Join Date: Jun 2012
Location: Ottawa, Canada
Posts: 19
Cajunrgfm is on a distinguished road
Default

The gvw of a 550 is 19500, a 450 is just a hd 350, i don't tow anything bigger than an f350, and it is only across town, my truck is a wrecker/towtruck. I need it to blow the doors off the small dodge/chevy trucks when empty
Reply With Quote
  #4  
Old Tue, June 5th, 2012, 06:24 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 206
Jeremy is on a distinguished road
Default

Ok so go all out if you want to. Some people get 550-450's and keep them at max GVW and beyond. These engines wont last long, if they're cranked up and loaded all the time. I'm not a 6.0 hater, its just a fact. Doesnt sound like you'll be loaded up, so you should be fine.

I see you have new heads, but did you get studs too? Get custom tunes for the CTS from Bill, and have the FICM programed with the A40. You can change the max power you want from it with the CTS and the custom tunes, but you'll always a minimum of 40 over stock with the FICM program. Unless you buy the FICM programmer, then you can change that when ever you want aswell.

jeremy
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #5  
Old Wed, June 6th, 2012, 09:11 AM
Cajunrgfm Cajunrgfm is offline
Whopper
 
Join Date: Jun 2012
Location: Ottawa, Canada
Posts: 19
Cajunrgfm is on a distinguished road
Default

Thanks jeremy, i have 6 psd 6.0's in the fleet, 4 f450's and 2 550's, they are under police contract all towtrucks. They are all stock 'cept my personal 550, the 450's replaced 350's for the main reason that the 450,2 wd, have a straight axle w/leaf springs and don't need near the maintenance a 350 does , pounding on junk city streets. The dana 80 rear is also a bonus. The 550's are for the ability to winch anything out of anywhere, they also run like the are on rails on heavy snow and ice. So, they may tow heavy at times, but under 20 miles usually back home, and in no hurry. Now, for other jobs that are first come first served , i need her to be able to scoot. I have ficms i can send bill, i have the cts too, i am a 28 year, retired Caterpillar tech, and my buddy is a factory trained psd tech, so we have the 6.0 mechanics covered. I don't believe in hi output canned tunes, i am quite happy with the cts level 2 but i know custom is better. I never would have installed w/out Bill saying that it does address the tranny. And it does shift well. But i know Bill has better for my engine.
Reply With Quote
  #6  
Old Wed, June 6th, 2012, 05:46 PM
Cajunrgfm Cajunrgfm is offline
Whopper
 
Join Date: Jun 2012
Location: Ottawa, Canada
Posts: 19
Cajunrgfm is on a distinguished road
Default

Ok, as i familiarize myself to the site, i have found my ecm strategy to be VXBC9PE, in further reading, "groovy chick" has this listed as not a preffered strategy. so then, my system should be rolled back.
Reply With Quote
  #7  
Old Thu, June 7th, 2012, 12:15 AM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 206
Jeremy is on a distinguished road
Default

Yes, its what PHP recommends.
Reply With Quote
  #8  
Old Mon, June 11th, 2012, 02:29 PM
Cajunrgfm Cajunrgfm is offline
Whopper
 
Join Date: Jun 2012
Location: Ottawa, Canada
Posts: 19
Cajunrgfm is on a distinguished road
Default

With the help of jeremy and many others, yes, a ficm and ecm rollback/tune is for my trucks. As for Bill and his team, everything they are doing is very positive and i believe the safety and longevity of internal parts is and has been addressed with much dyno and real life testing. I am very impressed, and still have much reading to do,and tho' I have a cts on my 6.0, am leaning towards buying the php ficm tuner and custom tunes and ecm rollback, just to not be at the mercy of edge wiping my chit away, plus having the ficm and rollback strategies at my fingertips.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:22 PM.


All Contents Copyright 2008-2024, Power Hungry Performance