|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Tue, April 5th, 2011, 03:31 AM
|
|||
|
|||
Best CAI?
What's the best cai and which is the best filter to go with afe wise pro 5 pro 7 or dry?
|
|
#2
Tue, April 5th, 2011, 11:19 AM
|
||||
|
||||
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
#3
Tue, April 5th, 2011, 01:30 PM
|
|||
|
|||
|
agreed.. Tymar/DIY only.
__________________
2002 7.3 F250 Supercab Shortbox DIY intake CCV dumped Autometer gauges WW/ATS 1.0 exhaust housing Hutch/Harpoon in tank mods/hpX line AIH delete/ebpv delete TruCool trans cooler Straight piped PHP FU 
|
|
#4
Wed, April 6th, 2011, 02:41 PM
|
||||
|
||||
|
I've got the DIY setup now, but have considered going to the S&B or another that would be quieter and is actually sucking in colder air. Is there anything that really makes the DIY/Tymar better other than the cost?
__________________
Bob- 2003 F250 Lariat 7.3PSD CC SB FX4 Kwik (6637) Filter, RE 2.5" leveling kit, F350 Rear Blocks, TC Lock, Fumoto, EBPV/Exhaust Brake,6.0 Tranny Cooler, AIH Delete, IssPro EV2 Gauges, PHP Phoenix stock, 25tow, 40tow, 65tow, 80dd, 100perf, In-tank mods, Muffler Delete, WW, FRx,HPx, JW Stage 1 Trans, Swamps HV/HF IDM -Pulling a 38' Forest River Sierra 5th Wheel 
|
|
#5
Wed, April 6th, 2011, 08:26 PM
|
|||
|
|||
|
Best CAI?
I like the cost of the DIY setup but like he others cuz they have the shield to keep out the hot engine air out and plus the intake Tube with less groves in it so less restriction
|
|
#6
Wed, April 6th, 2011, 08:40 PM
|
|||
|
|||
|
I really like the Ford AIS for me not looking for crazy high HP numbers. Great filter & keeps the stock look under the hood.
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt,
|
|
#7
Thu, April 7th, 2011, 09:25 AM
|
||||
|
||||
|
Quote:
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
#8
Thu, April 7th, 2011, 10:55 AM
|
|||
|
|||
|
Is the tymar washable/cleanable? Or do you have to replace it when it gets dirty?
I cleaned my AFE (regular filtering) filter last weekend and the dirt that came out of it was real fine grain.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
|
|
#9
Thu, April 7th, 2011, 11:44 AM
|
||||
|
||||
|
Quote:
On thing to consider is that paper filters are not water resistant. If you live in a rainy/humid climate, you may be looking at a more frequent change interval due to moisture contamination. Once a paper filter gets wet, it's screwed...... Otherwise, as long as the intake tube/adapter you use for the DIY seals properly, you never have to worry about dirt getting into your engine.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
#10
Sun, April 17th, 2011, 06:40 AM
|
||||
|
||||
|
I like the Amsoil EAAU4095 -EA with a prefilter EAPF12 -EA, this makes a great DIY setup with 4" exhaust tube to make the piping. Really simple, resists water, dry media, and filters more air. Plus this is a cleanable filter with light air pressure. Filter manager gauge fits right in the end hole so you still know when to clean the filter.
The pre cleaner is water resistant also. I have been running this setup for over a year on gravel roads and still can't even see a difference in the filter minder gauge. I have cleaned it 5 times (the pre filter and 2 times on the actual filter). I am yet to see any dust on the inside of the tube or filter. Pictures below.
__________________
Thank you and have a great day, Troy Detweiler I have a '99 F 250 7.3L Diesel w/ a 6 speed Tranny and 4x4. Mods: Amsoil dual bypass oil filters, Amsoil air intake mod DIY, fuel preasure spring mod(70psi), FU Chip and Burner , 3.73 rear gears, leveling kit (DIY), Stabilizer bars on the rear axle (DIY). '02 F 350 7.3L, 6spd,4x4,CC, Dually- Just bought 4-15-11
|
|
|
|
Linear Mode
