![]() |
|
F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
The problem you're having is a hardware issue with the burner. We've been in contact with TS about this issue and they are aware of it. As it has been explained to me, the problem is with the close proximity of the power relay to the end of a chip when it is installed in the burner. In some situations, when the chip is installed into the burner it can come in contact with the relay and cause the relay to shift slightly. This ends up lifting one of the feet on the relay and causes the chip to not receive power.
(click on image to enlarge) ![]() If you are handy with a soldering iron (or know someone who is), there is a very simple repair that will get you up and running in no time. Just follow these instructions: 1) Remove the front panel of the burner. (click on image to enlarge) ![]() 2) Slide circuit board out the front of the case. 3) Locate the relay and identify the disconnected terminals(s). (click on image to enlarge) ![]() 4) Reseat the relay and resolder the offending terminals(s). (click on image to enlarge) ![]() 5) Reinstall the circuit board back into the case making sure the board is in the lowest groove in the case (same as the lowest screw holes). Also make sure to line up the USB connector in the back of the case. (click on image to enlarge) ![]() 6) Reinstall the front cover. That should about do it. If you're not comfortable with performing this operation yourself, please let me know and we'll get you and RMA to send the burner in for repair. Take care.
__________________
Bill Cohron - The Mad Doctor ![]() ![]() ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Much to my surprise, I'm actually quite enjoying Linux! ![]() |
|
|