Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Minotaur Automotive Tuning Software

Minotaur Automotive Tuning Software
Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here.

Also, check out our Facebook group: Facebook - Minotaur Tuners


Reply
 
Thread Tools Display Modes
  #1  
Old Tue, September 28th, 2010, 04:39 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
 
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default Hitting Rev Limiter

What did I do wrong?

It will hit the limiter between shifts, only when wide open. Does not seem like it is the trans slipping, just wont shift.
Reply With Quote
  #2  
Old Tue, September 28th, 2010, 05:02 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,654
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Do you have the WOT shift parameters set too high? RPM Anticipated shifts?
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #3  
Old Tue, September 28th, 2010, 08:30 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
 
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default

WOT shifting is set for 3400 rpm, fuel limit should not really come in till around 3600ish.

I cannot find anything labeled "RPM Anticipated shifts", I did find RPM Maximum to Predict Upshifts - which is set to 1000 RPM.
Reply With Quote
  #4  
Old Thu, March 31st, 2011, 11:40 PM
967.3L4x4's Avatar
967.3L4x4 967.3L4x4 is offline
Minotaur Newb
 
Join Date: Aug 2009
Location: Melbourne, FL
Posts: 30
967.3L4x4 is on a distinguished road
Default

Just wondering if you came up with anything on this. Mines doing the same thing, kind of like it shifts too softly for stage IIs and lets it over rev. Seems like the shits need to be harder and faster. This is a tune I got from Bill for the IIs so Im assuming anything the has to due with it engine wise should be pretty good and some tranny tuning should take care of it. I messed with some stuff a little but would like some guidance before I go too far. Any tips would be appreciative.
Thanks
John
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles
Intake, Exhaust, 6.0L IC,
4 Wheel Disc Brakes. Dana 60, Electric Fuel,
SD HPOP, 6" Miter cuts, 3" plenums
Rosewood Stage IIs, Built tranny.
Minotaur with some tunes from Bill

Planning: Traction bars, HPOP, Nitrous??
Reply With Quote
  #5  
Old Fri, April 1st, 2011, 12:03 AM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
 
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default

Is the shift happening, but not holding?

If so try decreasing the Target Slip Time, or increasing the Trans. TV Pressure, or both for that particular shift.
Reply With Quote
  #6  
Old Fri, April 1st, 2011, 06:22 PM
967.3L4x4's Avatar
967.3L4x4 967.3L4x4 is offline
Minotaur Newb
 
Join Date: Aug 2009
Location: Melbourne, FL
Posts: 30
967.3L4x4 is on a distinguished road
Default

It defiantly seems like it tries to shift.

I couldn't find the target slip time, I read that in another post but couldn't find it. I did raise the TV pressure and it helped a little on the 1-2 shift but it still isn't right.
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles
Intake, Exhaust, 6.0L IC,
4 Wheel Disc Brakes. Dana 60, Electric Fuel,
SD HPOP, 6" Miter cuts, 3" plenums
Rosewood Stage IIs, Built tranny.
Minotaur with some tunes from Bill

Planning: Traction bars, HPOP, Nitrous??

Last edited by 907DAVE; Fri, April 1st, 2011 at 06:57 PM. Reason: I made a bo-bo.
Reply With Quote
  #7  
Old Fri, April 1st, 2011, 06:58 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
 
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default

Sorry bout that......


I just realized you are playing with an OBS....target slip time must not be an option for ya.
Reply With Quote
  #8  
Old Fri, April 1st, 2011, 08:18 PM
967.3L4x4's Avatar
967.3L4x4 967.3L4x4 is offline
Minotaur Newb
 
Join Date: Aug 2009
Location: Melbourne, FL
Posts: 30
967.3L4x4 is on a distinguished road
Default

Dang, any other ideas? All i really see the could speed up the shifts are the TV tables
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles
Intake, Exhaust, 6.0L IC,
4 Wheel Disc Brakes. Dana 60, Electric Fuel,
SD HPOP, 6" Miter cuts, 3" plenums
Rosewood Stage IIs, Built tranny.
Minotaur with some tunes from Bill

Planning: Traction bars, HPOP, Nitrous??

Last edited by 967.3L4x4; Fri, April 1st, 2011 at 08:42 PM.
Reply With Quote
  #9  
Old Sat, April 2nd, 2011, 05:15 PM
Blowby's Avatar
Blowby Blowby is offline
Double Whopper
 
Join Date: Jan 2009
Location: CO
Posts: 28
Blowby is on a distinguished road
Default

Quote:
Originally Posted by 967.3L4x4 View Post
Dang, any other ideas? All i really see the could speed up the shifts are the TV tables
Order the BTS valve body and adjust the calibration plate for shift firmness. BTS valve body install.
__________________
F250 Reg Cab - 1,172 HP / DJ# / 11.56 Fuel Only / 10.94 Nitrous / Dyno Run 10-2009
--------------------------------------------------
Wide Open Performance - Engine, Chassis Build
Swamps Diesel Performance - Injectors & IDM
Gearhead Automotive Performance - Stage II Cam
Reply With Quote
  #10  
Old Sat, April 2nd, 2011, 05:22 PM
Blowby's Avatar
Blowby Blowby is offline
Double Whopper
 
Join Date: Jan 2009
Location: CO
Posts: 28
Blowby is on a distinguished road
Default

Quote:
Originally Posted by 907DAVE View Post
WOT shifting is set for 3400 rpm, fuel limit should not really come in till around 3600ish.

I cannot find anything labeled "RPM Anticipated shifts", I did find RPM Maximum to Predict Upshifts - which is set to 1000 RPM.
The over run will increase as power increases, with Stage II's shoot for about -350/400 rpm from your actual target RPM. Also rev limiter will go the other way so add rpm to your target point. If you want 3600 input 3900 or so..... hope this helps.
__________________
F250 Reg Cab - 1,172 HP / DJ# / 11.56 Fuel Only / 10.94 Nitrous / Dyno Run 10-2009
--------------------------------------------------
Wide Open Performance - Engine, Chassis Build
Swamps Diesel Performance - Injectors & IDM
Gearhead Automotive Performance - Stage II Cam
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:25 PM.


All Contents Copyright 2008-2024, Power Hungry Performance