Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
  #1  
Old Wed, June 10th, 2009, 03:49 PM
WoodWacker WoodWacker is offline
WoodWacker
 
Join Date: Jun 2009
Location: Seal Rock, Oregon
Posts: 2
WoodWacker is on a distinguished road
Default Traction Control and Gryphon Tunes

This may be a question for Bill. This question came up in discussion while I wait for my Gryphon to arrive. How (if at all) does the Gryphon handle the traction control algorithm that is in the Powertrain Control Module that cuts engine power during a percieved loss of traction. Does this module override the traction control?
  #2  
Old Wed, June 10th, 2009, 04:30 PM
88Racing's Avatar
88Racing 88Racing is offline
SENIOR MODERATOR
 
Join Date: Feb 2009
Location: Somewhere ....
Posts: 4,241
88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light
Default

About 3 months ago this topic was discussed and Bill might be able to do something about it but for right now the gryphon with canned or custom tunes does not do anything with it.
Look for this thread in gryphon programmers.
"Question for the Mad Dr."
http://dygytalworld.ehost-services13...ight=parabolic

Lars
__________________
SENIOR MODERATOR--PTLA

God doesn't have a Facebook but he's my friend.
God doesn't have a twitter, but I follow him.

Last edited by 88Racing; Wed, June 10th, 2009 at 04:52 PM.
  #3  
Old Fri, February 26th, 2010, 03:11 PM
TX_Hunter TX_Hunter is offline
Whopper Junior
 
Join Date: May 2009
Posts: 5
TX_Hunter is on a distinguished road
Default

I did a search on "traction" and this is the only relevant thread that came up; I'm surprised there aren't more people discussing it.

I'm thinking of trading my '08 (gryphon custom tuned) in for a '10, and the more I read about the traction control the more I dislike. Does Bill have the ability to completly disable this feature with his custom tunes?

Thanks.
  #4  
Old Fri, February 26th, 2010, 05:49 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

I thought it was possible to turn the traction control off. I checked my owner's manual to make sure and it says it is possible but you will have to turn it off every time you crank the truck. That was another option I decided to skip and save money on so I only know as much as Ford is willing to tell in their manual.
__________________
  #5  
Old Fri, February 26th, 2010, 06:00 PM
TX_Hunter TX_Hunter is offline
Whopper Junior
 
Join Date: May 2009
Posts: 5
TX_Hunter is on a distinguished road
Default

I had read that as well, but what I understand to mean by "turning it off" is that in 4L it will be disabled, but in 4H & 2H it is disabled up to a certain speed (30mph?). What if I want to brake and rooster-tail mud 15ft ?

That may not be entirely correct, just my understanding, but in all honesty it's a feature I'd like to do without and hope it can be disabled altogether.
  #6  
Old Fri, February 26th, 2010, 07:47 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

Maybe, I didn't read it past the part that said it could be turned off. 4wd was another feature I decided I didn't really need. I've been stuck one time and not even 4wd could have gotten me out because I slid down the side of a muddy hill. And thats because I was playing where I shouldn't have anyway.
__________________
  #7  
Old Sat, February 27th, 2010, 03:48 PM
strokin'_tatsch's Avatar
strokin'_tatsch strokin'_tatsch is offline
Whopper
 
Join Date: Feb 2010
Posts: 14
strokin'_tatsch is on a distinguished road
Default

My buddies '09 F-150 will do burnouts and stuff as long as u turn of the traction control. if you hold the button til the light in the dash starts blinking then the traction control, stability control, etc are all disabled. if your at a dead stop and you just hit the button it will turn off traction control, but not the other systems. tried to do donuts in it though and it won't do it(at least on dry pavement). i'm sure if it had a little more power then it would do ok, but all we have done to it is put a flowmaster super 44 on it.
__________________
Travis-- Death Row Diesel Inmate #7
1995 Ford F-250 regular cab long bed PSD
MODS- 6637, TE modded 17*, Rosewood 160/80's, Tony's tunes, HPX, 120v IDM, 3" DP to 5" stacks, CPR fuel system, DRD traction bars, ISSPRO EV2's, scan guage, VALAIR full ceramic clutch, Midwest short throw shift kit

381hp/870tq
14.32 @ 97mph

  #8  
Old Tue, July 17th, 2012, 01:27 AM
Cooker Cooker is offline
Whopper
 
Join Date: Jul 2012
Location: Vancouver BC Canada
Posts: 13
Cooker is on a distinguished road
Default

Searched on the forum and could not find a definitive answer... Does the Gryphon allow you to disable traction control and/or stability control? Or can Bill make a custom setting for it? I have read the Ford owners manual and holding the button 5 seconds will disable it up to 35mph, it is very hard to get places in the snow/mud when it kills your power at 35, also less fun
__________________
2009 F150 XLT 4X4 5.4 Edge CS / 2" Autospring Lift
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:21 AM.


All Contents Copyright 2008-2024, Power Hungry Performance