1868pike1978
Wed, August 11th, 2010, 01:13 PM
i am filling out the order form for the FU chip and it askes what my desired idle RPM is. what is a good one to choose? i have a 97 psd
cleatus12r
Wed, August 11th, 2010, 01:21 PM
Stock. If it's fine where it is, then you don't need to put anything.
If you think it should be a bit higher or lower, you can let us know.
1868pike1978
Wed, August 11th, 2010, 01:25 PM
Stock. If it's fine where it is, then you don't need to put anything.
If you think it should be a bit higher or lower, you can let us know.
is between 500 and 600 a good idle then?
cleatus12r
Wed, August 11th, 2010, 01:44 PM
Depending on the PCM code, the idle can vary a bit. Most are set at about 580 when warm. You can probably just leave that field blank.