|
|
|||||||
| 2009 to 2014 F-150 3.5L, 3.7L, 4.6L, 5.0L, 5.4L, and 6.2L equipped F-150s. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Wed, September 7th, 2011, 12:21 AM
|
|||
|
|||
Any DIY Window Tinters Out there?
Hey guys I've done window tint before but was just curious on my 10 F150 if just taking off the door panel works well or taking the whole window out would be best? Thanks for any input!
|
|
#2
Wed, September 7th, 2011, 06:23 AM
|
||||
|
||||
|
I've not tinted the windows in my F150, but I've done it in other vehicles. The only time I took the window out was when I did the moonroof window in my Honda. Otherwise, I just left the windows in place. Taking the door panels off makes things a lot easier.
- Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
|
|
#3
Wed, September 7th, 2011, 09:49 AM
|
||||
|
||||
|
For me, tinting windows is a lot like doing bodywork. I SUCK AT IT. I'm not nearly patient or particular enough......
I have paid people to do mine for me over the years after the first two attempts but only ever watched one guy. It's an art...... He didn't remove anything but he definitely knew what he was doing.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
#4
Wed, September 7th, 2011, 01:06 PM
|
|||
|
|||
|
Thanks
I was hoping I wouldn't have to take the window out. I would have been a tad nervous. On the other cars I did it it was easy enough to get behind the weatherstrip but the panel comes up so high on the F150's it's pretty difficult! I wish I could have the chance to watch someone do it! Those guys know what they're doing for sure!
|
|
|
|
Linear Mode
