Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > The Starting Point > New Member Introductions
Reload this Page New to this forum
Register FAQ Calendar

New Member Introductions
Welcome to the Power Hungry Performance Forum. We're glad that you're here! Start a new thread and tell us a little about yourself!

PLEASE POST TECHNICAL and/or SUPPORT QUESTIONS in the APPROPRIATE SECTION of the FORUM

Closed Thread
 
Thread Tools Display Modes
  #1  
Old Sun, February 14th, 2010, 08:10 PM
strokin'_tatsch's Avatar
strokin'_tatsch strokin'_tatsch is offline
Whopper
  
Join Date: Feb 2010
Posts: 14
strokin'_tatsch is on a distinguished road
Default New to this forum
Hi, just checkin' into this forum. i'm on many other forums, but i like to check all of them out from time to time. Not a PHP customer at this time, but perhaps sometime down the road. Not new to modding my diesel, but when it comes to my gasser... Well i did build the engine, but getting it to run seems to be becoming a pain b/c i can't find a factory 5.0 mass air flow harness from an F150 and i'm not too sure how to mod the original harness to run the MAF so its been sitting for close to a year now. LoL
__________________
Travis-- Death Row Diesel Inmate #7
1995 Ford F-250 regular cab long bed PSD
MODS- 6637, TE modded 17*, Rosewood 160/80's, Tony's tunes, HPX, 120v IDM, 3" DP to 5" stacks, CPR fuel system, DRD traction bars, ISSPRO EV2's, scan guage, VALAIR full ceramic clutch, Midwest short throw shift kit

381hp/870tq
14.32 @ 97mph
  #2  
Old Sun, February 14th, 2010, 08:39 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
  
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default
'Bout time you got over here!
When did you get a gasser?...and why?
__________________
  #3  
Old Sun, February 14th, 2010, 09:04 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
  
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default
Oh and your gonna like this forum because there is a ton of good info and we dont put up with much BS like on some of the others.
On that note lets leave some of the mud slinging for the pasture.
__________________
  #4  
Old Sun, February 14th, 2010, 09:10 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
Ford Racing wont sell just the harness?

I got mine in a kit, but do not see why they would not separate it.


Ohh and WELCOME!
  #5  
Old Sun, February 14th, 2010, 11:46 PM
Buddy Starr Buddy Starr is offline
Praying for my Tranny
  
Join Date: Oct 2009
Location: Colorado Springs Colorado
Posts: 28
Buddy Starr is on a distinguished road
Default
Welcome
__________________
2003 F250 7.3 PSD CC SB FX4
DP Tuner F6, 160/80 Sticks, Diamond Eye 4 Inch Exhaust, AFE Stage II Intake,
DieselSite:Turbomaster Wastegate Control, AIH Delete, BRV+, Intercooler and Engine Boot Kit
  #6  
Old Mon, February 15th, 2010, 12:08 AM
JWBFX4 JWBFX4 is offline
Triple Whopper with Cheese
  
Join Date: Feb 2009
Location: Tuscaloosa,AL
Posts: 804
JWBFX4 is on a distinguished road
Default
Welcome
__________________
Flowmaster 40, PHP Gryphon, AS 2" kit
Thanks http://screen-fx.net for the sig.
  #7  
Old Mon, February 15th, 2010, 12:25 AM
88Racing's Avatar
88Racing 88Racing is offline
SENIOR MODERATOR
  
Join Date: Feb 2009
Location: Somewhere ....
Posts: 4,241
88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light
Default
Welcome!
__________________
SENIOR MODERATOR--PTLA

God doesn't have a Facebook but he's my friend.
God doesn't have a twitter, but I follow him.
  #8  
Old Mon, February 15th, 2010, 02:39 AM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
  
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,266
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default
Travis,

Glad to have you around, dude! Catch ya round the fuel pumps.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Windows™ 11 is garbage!

Much to my surprise, I'm actually quite enjoying Linux!
  #9  
Old Mon, February 15th, 2010, 11:28 PM
strokin'_tatsch's Avatar
strokin'_tatsch strokin'_tatsch is offline
Whopper
  
Join Date: Feb 2010
Posts: 14
strokin'_tatsch is on a distinguished road
Default
Quote:
Originally Posted by longshot270 View Post
'Bout time you got over here!
When did you get a gasser?...and why?
i got roy's old copper F-150. i'm in the middle of swapping in a 5.0 into it. the engine going into now has flat top higher compression pistons, cryo'd rods, new bearings and all clearances are awesome, Ford Racing B303 cam, GT40P heads ported, port matched upper and lower typhoon intakes, Ford Racing 1.72:1 roller rockers, chromoly pushrods, new roller lifters, comp double roller timing set, smog eliminator, MAF conversion(in progress), 70mm throttle body, EGR eliminator, throttle body spacer, MSD pro billet, MSD blaster 2 coil, taylor 409 wires, and probably go with an air raid filter or something. dang i have spent too much money on that truck already. i still have to order the MSD, throttle body, and EGR eliminator along with a 6" lift and put these BFG muds on there with my rockcrawler streetlock wheels. LoL. Oh yeah, and it's got ceramic coated shorty headers, high volume oil pump, ARP head bolts, etc. i think it should be able to handle a little nitrous and some boost too. i didn't do a girdle or very heavy springs, but if i decide that nitrous or a supercharger is in need then i will throw on a girdle and heavier springs to keep it running happy. haha

Quote:
Originally Posted by longshot270 View Post
Oh and your gonna like this forum because there is a ton of good info and we dont put up with much BS like on some of the others.
On that note lets leave some of the mud slinging for the pasture.
i'm on a ton of forums buddy. i check them all frequently so i will be around here. i think i'm on 9 or 10 forums total now. LoL

Quote:
Originally Posted by Power Hungry View Post
Travis,

Glad to have you around, dude! Catch ya round the fuel pumps.
Bill, i'm glad to be here brother. i will see ya over on PSN. haha. need to see if you can tune my gasser. it's a '94 F-150, but it will have a mustang A9L computer in it. haha
__________________
Travis-- Death Row Diesel Inmate #7
1995 Ford F-250 regular cab long bed PSD
MODS- 6637, TE modded 17*, Rosewood 160/80's, Tony's tunes, HPX, 120v IDM, 3" DP to 5" stacks, CPR fuel system, DRD traction bars, ISSPRO EV2's, scan guage, VALAIR full ceramic clutch, Midwest short throw shift kit

381hp/870tq
14.32 @ 97mph

Last edited by strokin'_tatsch; Mon, February 15th, 2010 at 11:48 PM.
Closed Thread

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 02:27 PM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance