PATS problem!!!!
 

Removed the phoenix for a reburn but now theft light flashes and cranks but no start.
Tried the following:

replugged in PATS = crank no start
left batteries unplugged overnight = crank no start
turned key on, waited til flash slowed, turned off, key out and away for 1 minute, key back in= crank no start

I'm at a loss right now as to what to do other than put the chip back in to start which is what don't want to do.

HELP!

hello,
did you find a solution, I have this problem with a new chip and I have tried every solution I have found online without a solution, although mine will start sometimes if I wait about 2 minutes after turning key to the on position. then sometimes no start at all. no matter what I do the theft light flashes quickly for a minute.