|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Tue, August 21st, 2012, 04:42 PM
|
|||
|
|||
PATS problem!!!!
Removed the phoenix for a reburn but now theft light flashes and cranks but no start.
Tried the following: replugged in PATS = crank no start left batteries unplugged overnight = crank no start turned key on, waited til flash slowed, turned off, key out and away for 1 minute, key back in= crank no start I'm at a loss right now as to what to do other than put the chip back in to start which is what don't want to do. HELP! |
|
#2
Sun, October 28th, 2012, 12:06 AM
|
|||
|
|||
|
hello,
did you find a solution, I have this problem with a new chip and I have tried every solution I have found online without a solution, although mine will start sometimes if I wait about 2 minutes after turning key to the on position. then sometimes no start at all. no matter what I do the theft light flashes quickly for a minute. |
|
|
Linear Mode
