|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Tue, February 9th, 2010, 04:48 PM
|
||||
|
||||
Need pic of cut PCM Holder for chip install/removal..
The title pretty much says it. I know I have seen a pic of the PCM holder modded so the chip will slide in and out without having to remove the entire thing from the truck, but I can't seem to find it. Thanks for the help.
__________________
Bob- 2003 F250 Lariat 7.3PSD CC SB FX4 Kwik (6637) Filter, RE 2.5" leveling kit, F350 Rear Blocks, TC Lock, Fumoto, EBPV/Exhaust Brake,6.0 Tranny Cooler, AIH Delete, IssPro EV2 Gauges, PHP Phoenix stock, 25tow, 40tow, 65tow, 80dd, 100perf, In-tank mods, Muffler Delete, WW, FRx,HPx, JW Stage 1 Trans, Swamps HV/HF IDM -Pulling a 38' Forest River Sierra 5th Wheel 
|
|
#2
Tue, February 9th, 2010, 08:06 PM
|
||||
|
||||
|
Unfortunately, I just shipped off the remaining PCM holder that I had and I just gave my wife (ex) the camera.
It's easy though. Just cut out the portion of the holder that covers up the J3 port. I use a cut-off wheel on a die grinder, but I've also used a soldering gun (basically as a hot knife) and one of those razor knives. I like to take off the entire inside part (closest to the pedals) to get rid of the top bolt hole. Another thing I do is grind off the lip on the outside (toward the fender) where it goes up against the firewall so that I don't have to pry the PCM out when I remove it. Hope this helps and sorry I don't have any pictures.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#4
Fri, February 12th, 2010, 02:48 AM
|
||||
|
||||
|
Cody,
Is that the (ex) wife or (ex) camera? Or both?? 
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#5
Fri, February 12th, 2010, 09:07 AM
|
||||
|
||||
|
Quote:
__________________
|
|
#6
Fri, February 12th, 2010, 09:14 AM
|
||||
|
||||
|
I PM'd Dave my cell number and he texted the pics to me. Thanks for the help everyone!
__________________
Bob- 2003 F250 Lariat 7.3PSD CC SB FX4 Kwik (6637) Filter, RE 2.5" leveling kit, F350 Rear Blocks, TC Lock, Fumoto, EBPV/Exhaust Brake,6.0 Tranny Cooler, AIH Delete, IssPro EV2 Gauges, PHP Phoenix stock, 25tow, 40tow, 65tow, 80dd, 100perf, In-tank mods, Muffler Delete, WW, FRx,HPx, JW Stage 1 Trans, Swamps HV/HF IDM -Pulling a 38' Forest River Sierra 5th Wheel
|
|
#7
Fri, February 12th, 2010, 07:12 PM
|
||||
|
||||
|
Quote:
This is my first celly that I have had for about 7 years.....I hate cell phones. 
|
|
|
Linear Mode
