|
Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Help! Think pcm is junk
im new to the powerstroke world. although i am a mechanic i still think i messed up my truck. i just prchased the chip from php and was installing it it didnt work twice i kept cleaning and cleaning and now i have no wait to start even with out the chip. fuses look good but which ones would be the exact calprit. i guess i should have unhooked the batteries too. any help is appreciated.
|
#2
|
||||
|
||||
Try disconnecting the battery's for about 10 minutes, and see what that does.....its worth a shot.
Also check the 30 amp fuse in the lower right side of the fuse panel inside the truck. |
#3
|
|||
|
|||
napa has a reman pcm does it need to be flashed or does the chip overide it?
|
#4
|
||||
|
||||
As long as it is the same processor (DPC#) the chip will override to whatever calibration is on the chip.
|
#5
|
|||
|
|||
ok than i guess i need to send the chip back to get checked also
|
#6
|
|||
|
|||
ok the pcm must be flashed because it runs. put the chip in and the wait to start and water in fuel light stays on so i guess i messed up the chip. so how much is it gonna cost me? the same 250 for a chip or the full price again?
|
|
|