Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled)
Reload this Page Chip installed but question
Register FAQ Calendar Mark Forums Read

Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled)
Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip.

If you have any other questions or comments about the Phoenix/TS chip, please post it here.

 
 
Thread Tools Display Modes
  #1  
Old Mon, December 14th, 2009, 06:23 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
How did it run? Were you able to exceed 24 PSI of boost?

I assume since you said it was for overboost, then it was for overboost. I am just asking you to be sure that's what it was.

What program were you running in? What year truck?
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
  #2  
Old Mon, December 14th, 2009, 09:32 PM
ttford07's Avatar
ttford07 ttford07 is offline
building FarmBoy monster
  
Join Date: Nov 2009
Location: Grain hills of Washington
Posts: 30
ttford07 is on a distinguished road
Default
Its a 2000, I think it was on smokeshow when it did it, i dont remember i was out testing them all, but it went away when i was driving home on 65dd. I just figured it was overboost because i was building like 30psi and the truck was running great, i have a mod stock turbo with ats housing and a few other things, but shouldnt i be able to build more than 30psi? could it just be the truck getting use to the new programing?
  #3  
Old Mon, December 14th, 2009, 09:39 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
My guess is that you have a P1211 ICP lower than desired code. I don't think that Bill disables that code because it's not so much a nuisance as the overboost, but a sign that your high pressure oil pump is not up to snuff.

It's still nothing to worry about.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
  #4  
Old Tue, December 15th, 2009, 08:14 PM
ttford07's Avatar
ttford07 ttford07 is offline
building FarmBoy monster
  
Join Date: Nov 2009
Location: Grain hills of Washington
Posts: 30
ttford07 is on a distinguished road
Default
i dont know how it would be because i have an adrenaline hpop and its only like 3 months old now
  #5  
Old Tue, December 15th, 2009, 09:25 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
I didn't know that. You may have to find out exactly what the code is and then contact Bill if it's something that you think should be disabled.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
  #6  
Old Thu, December 17th, 2009, 08:59 AM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
  
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,271
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default
Please add your name to the User CP so we know who ya are.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Windows™ 11 is garbage!

Much to my surprise, I'm actually quite enjoying Linux!
  #7  
Old Sat, December 19th, 2009, 05:31 AM
ttford07's Avatar
ttford07 ttford07 is offline
building FarmBoy monster
  
Join Date: Nov 2009
Location: Grain hills of Washington
Posts: 30
ttford07 is on a distinguished road
ok so the code is an over boost code, with my boost fooler plugged in the ses light does not come on. sorry but whats the user cp?
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 08:31 AM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance