|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Thu, May 13th, 2010, 01:43 PM
|
||||
|
||||
PCM code??
Im finally ready to put my order in and I cant find the PCM code. I read it was below the master cylinder but all I see is a bunch of wires. So does anybody have a picture or a detailed description of where its at?
Thanks |
|
#2
Thu, May 13th, 2010, 02:08 PM
|
||||
|
||||
|
This is the connector you're looking for.
 The tag you're looking for will be on the OPPOSITE SIDE of where the above picture was taken.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#3
Thu, May 13th, 2010, 02:16 PM
|
||||
|
||||
|
Quote:
|
|
#4
Thu, May 13th, 2010, 02:43 PM
|
||||
|
||||
|
The bolt just holds the connector in. It won't come all the way out of the connector, either, so don't get frustrated. You'll feel the threads "clunk" when the bolt is out of the PCM threads.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#5
Thu, May 13th, 2010, 02:48 PM
|
||||
|
||||
|
Quote:
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
