3 questions so far...

[Wile_E]

I read your post a couple of times before what you are saying sunk in. I guess it has been a long time since I have changed any of those settings. Now that you spell it out I think I was doing it wrong.

I will check it out.

I really appreciate the help.

Originally Posted by cleatus12r

If you look, you will see that you have different types of display options (1,2,3, and 4 parameters). If you select (hit [enter]) on the 4 gauge screen, you will see that there are the 4 different parameters displayed that you have listed.

You can use the up/down arrow buttons to select what you'd like changed and hit [enter]. This will bring up a list of available parameters denoted on the left margin by a "(*)" or "( )". Using [enter] will toggle to between selected ("(*)") and unselected ("( )").

[cleatus12r]

What I wrote is confusing, but it's SO hard to convey the actual process through written words.

[Longshot270]

Originally Posted by JackandJanet

You SHOULD be able to display the values you want, with one exception: Oil Temperature. Ford discontinued the Oil Temperature Sender in the more recent trucks, I think starting in 2008?

- Jack

I think between '06 and '07. There was a guy on F150online who's display said "0" and it was an '07



Cody, why not make a video of all the features and how to make them work? You could do that from your desk probably.

[cleatus12r]

Originally Posted by Longshot270

Cody, why not make a video of all the features and how to make them work?

Because I am a total computer dumb ***. I can make folders, copy, paste, and empty the recycle bin. That's about it.

I wouldn't have the first clue about how to go about making a video and putting it on the 'net.

[Wile_E]

What's the best way to check on my custom tunes? I hate to bug anyone, since I know they are busy, but I received my Gryphon early in May and am getting anxious to have the good stuff.

Should I just be patient? Should I try and call the shop? With my luck I'll call the shop and interrupt them working on my tunes!

Thanks.

[88Racing]

I see your hex in your user profile....maybe post it in this link>>>http://forum.gopowerhungry.com/give-...-ecm-tcm-code/

I didn't see it in there of course I didn't look real hard either......

Just have patience.....

[Jackpine]

Originally Posted by Wile_E

What's the best way to check on my custom tunes? I hate to bug anyone, since I know they are busy, but I received my Gryphon early in May and am getting anxious to have the good stuff.

Should I just be patient? Should I try and call the shop? With my luck I'll call the shop and interrupt them working on my tunes!

Thanks.

Please do what 88Racing said. You need to start a thread, and the title needs to be your name! In that thread, you tell PHP your hex/calibration code and the programmer's Serial Number (S/N). As 88 said, this is where you start that thread: Power Hungry Performance Forum

They'll see it as a new post and Bill will be able to write your tunes.

- Jack

[Wile_E]

I posted the HEX code etc. as you suggested in the other location. One thing - I can't seem to find a serial number... I found:

Bootloader v1.00b
Product E3.22.99
Firmware 24
Hex file RXCM5C4

Is this sufficient? If you can point me at the location for the serial number I will edit to include that.

Thanks again

[Wile_E]

Originally Posted by cleatus12r

What I wrote is confusing, but it's SO hard to convey the actual process through written words.

I disagree! When I read it I realized what I was doing wrong. That means your post made sense.



Well done, and again I thank you for the help. I am really excited for my custom tunes to arrive.

Wile_E