Do i have the right cable?

fordkindaguy · #1 Wed, October 7th, 2009, 12:09 PM

"Update ready for my gryphon"

Released on 11/19/2008

Updated firmware to be used with "Rev 4" and later cables ONLY.

Upating to this version with earlier revision cables will cause the cable to fail permanently and void your warranty.

My cable says its a .6 can i update my gryphon without worries??? i wasnt sure if the decimal point mattered

***Power Hungry*** · #2 Thu, October 8th, 2009, 03:45 AM

If you bought the programmer after 02/2009, you definitely have the later cables. Those warnings are only for folks who bought programmers the middle of last year.

You're good.

By the way, if you're seeing the cable warning, you're in the wrong update section. You'll be wanting to use the [Targeted Functions] option in the update menu. [Gryphon Update Manager] will load only the stock canned tuning back onto the unit.

Take care.

fordkindaguy · #3 Fri, October 9th, 2009, 12:02 AM

hey bill, i just wanted to do the update before i put the cust. on thanks for the help, i put a review up under the gryophon section

***Power Hungry*** · #4 Fri, October 9th, 2009, 02:13 AM

No problem. Never hurts to ask questions.

Much better than going "Oh crap. I shouldn't have done that!"

Thanks for the posts. We're thrilled everything is working for you.