Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old Sat, December 12th, 2009, 06:47 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

Rusty, I'll try to answer your questions "inline":

Quote:
Originally Posted by RUSTY2STUFF View Post
Hello,

I'm a newbie here and have a few questions. I am planning on ordering a new Gryphon, not updating an edge.

1 When I receive a new Gryphon it sounds like it comes with Tunes updated by PHP that are different from the Edge tunes. Is that correct?

Slightly different. They are still "canned tunes", but Bill has improved them a bit.

2 If I want custom tunes, but have not yet decided on my mods can I pay for the custom tunes now and let PHP know what mods I have done after I have made them and then get the custom tunes?

Yes - Just say in the remarks section of the order form that you are planning mods and will finalize the order for the tunes after you decide what you are going to install. If you know how many tunes you will be getting though, go ahead and pay for them now

3 Will I need to provide a hex code before or after my order and how do I get it?

You read the hex code in the screen of the Gryphon when you plug it into your truck for the first time. You won't know the hex code until you get your Gryphon and, Bill MUST have your hex code to write your tunes.

4 Will the canned tunes work ok with an intake until I install an exhaust. I am planning an a Volant or Banks.

The best thing to do would be to wait until you get your custom tunes before installing the intake. But, if you absolutely MUST install the intake before then, we recommend you use the Level 2 Tow tune, since it's a bit richer and try to stay off full throttle!

5 If I wanted to order 2 sets of custom tunes for instance 87 perf, 89 tow and 89 perf as one set and 91 perf 91 tow and 93 perf as another. Would I be able to switch back and forth between the sets of tunes?

No, you can't. The Gryphon can only support one set of up to three tunes. To do what you are asking, you'd need two Gryphons. As a practical matter, I doubt you'd ever want that many tunes. I have two tunes - a tow tune and a performance/economy tune for when I'm not towing. I never switch "flavors" of gas.

6 Last, Any suggestions on a dual exhaust that is not to loud would be appreciated. Not sure this is the best place for this question, but I'm here now and ...well... I'm a little lazy.

I'm not an expert by any means on exhausts. 88Racing, another Mod on this forum knows quite a bit about them and he'll probably chime in.

Thanks Gary
You're welcome, and I hope my thoughts helped!

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:38 PM.


All Contents Copyright 2008-2024, Power Hungry Performance