|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Thu, December 17th, 2009, 09:39 PM
|
||||
|
||||
6 pos numbered plate
Does any one know if they make a backing plate for the 6 pos. chips that is numbered 1-6. I seen one somewhere but cant seem to find it now
__________________
2003 F-250 7.3L Superduty Ranchhand Bumpers front and back ~ 6637 Intake ~ Zoodad ~ CCV ~ 5" Exhaust w/ 6" SS tip ~ Train Horns ~ Viair 450C ~ 5 Gallon Air Tank ~ Sound System ~ PHP Phoenix 6 position ~ 4 Dipricol Gauges on the Pillar ~ 05 Conversion ~ 08 Taillights **Soon To Come** 08 Tailgate ~ Adrenaline HPOP ~ More Gauges ~ Built Engine |
|
#2
Thu, December 17th, 2009, 09:56 PM
|
||||
|
||||
|
You are kind of on your own with that. I do think that you are right about seeing one somewhere but I can't find one either now.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#3
Thu, December 17th, 2009, 11:18 PM
|
||||
|
||||
|
I kinda figured that. Im thinking i can get a machine shop to make one.
__________________
2003 F-250 7.3L Superduty Ranchhand Bumpers front and back ~ 6637 Intake ~ Zoodad ~ CCV ~ 5" Exhaust w/ 6" SS tip ~ Train Horns ~ Viair 450C ~ 5 Gallon Air Tank ~ Sound System ~ PHP Phoenix 6 position ~ 4 Dipricol Gauges on the Pillar ~ 05 Conversion ~ 08 Taillights **Soon To Come** 08 Tailgate ~ Adrenaline HPOP ~ More Gauges ~ Built Engine |
|
#4
Fri, December 18th, 2009, 12:34 PM
|
||||
|
||||
|
There was a thread on PSN about this same question...
http://powerstrokenation.com/forums/...ad.php?t=47224
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#5
Sat, December 19th, 2009, 12:09 AM
|
||||
|
||||
|
I read the thread over there Bill. If you get someone to make some plates i will definetly order one from you.
__________________
2003 F-250 7.3L Superduty Ranchhand Bumpers front and back ~ 6637 Intake ~ Zoodad ~ CCV ~ 5" Exhaust w/ 6" SS tip ~ Train Horns ~ Viair 450C ~ 5 Gallon Air Tank ~ Sound System ~ PHP Phoenix 6 position ~ 4 Dipricol Gauges on the Pillar ~ 05 Conversion ~ 08 Taillights **Soon To Come** 08 Tailgate ~ Adrenaline HPOP ~ More Gauges ~ Built Engine |
|
#6
Mon, December 21st, 2009, 01:25 PM
|
|||
|
|||
|
I was thinking about using a vinyl sticker instead of a metal plate. Mainly becuase I was thinking about mounting the switch just to the right of the column and the plastic is curved there and a sticker would follow the curve and blend in well.
Any thoughts? |
|
|
Linear Mode
