|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Mon, January 4th, 2010, 02:31 PM
|
|||
|
|||
is this link the firmware update instructions ? i ask because it just says "update your gryphon" not "update your firmware" . Want to be sure.
http://forum.gopowerhungry.com/1034-post1.html |
|
#2
Mon, January 4th, 2010, 02:40 PM
|
||||
|
||||
|
That looks like the right one.
Follow the instructions.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#3
Sat, January 9th, 2010, 05:24 PM
|
|||
|
|||
|
i didnt update it yet
|
|
#4
Sat, January 9th, 2010, 08:24 PM
|
||||
|
||||
|
Quote:
I honestly can't recall at this moment if you have custom tunes or not. If you still have ONLY canned tunes, then you can update everything. But, I'm trying to head off other people possibly wiping out their custom tune(s) with a calibration update. And, yes, Mike - the Firmware update should give you the Com(manded) Gear display option. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#5
Sun, January 10th, 2010, 01:54 PM
|
|||
|
|||
|
thanks, and yes i do have custom tunes
|
|
#6
Mon, January 11th, 2010, 07:15 PM
|
|||
|
|||
|
So I do have COM GEAR as one of my displays, and I was wondering what does the lock symbol represent when in 4th gear? It seems like the tranny shifts again and then it will show a little padlock symbol..??
|
|
#7
Mon, January 11th, 2010, 07:34 PM
|
||||
|
||||
|
It means that your torque converter is locked.
__________________
|
|
|
Hybrid Mode
