|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, February 4th, 2010, 05:58 PM
|
|||
|
|||
Great info...thanks!
|
|
#2
Mon, February 8th, 2010, 08:29 PM
|
|||
|
|||
|
Pulled like a dream...I don't think my TFT ever went above 171..mostly stayed in high 150's. Didn't have to take OD off...it would take the torque conv. out on climbs, and even went into 3rd a few times but 90% of the time I was "locked". First time I ever seen the TC engage in 3rd was this weekend. With no load it is always going in while in 4th gear, but with the load this weekend, it engaged in 3rd a few times. My rear shocks were the only thing that showed load (weighed down real good) everything else about the truck was awesome. Thanks again for your help!
|
|
#3
Tue, February 9th, 2010, 11:31 AM
|
||||
|
||||
|
Glad to be of help and that you had a good towing experience. Like you, I see the TC lockup in 3rd gear when towing. I've even seen it do that in 2nd, when I'm climbing a long steep hill and I put the gearshift into 2nd to keep it in that gear range.
- Jack |
|
|
Hybrid Mode
