2-1/16" Dash Clock (or any 2-1/16" gauge for that matter) 2WD Models

***Longshot270*** · #1 Tue, February 9th, 2010, 07:48 PM

Well now I wish I had paid more attention because I had that area opened up because I was installing a remote starter. I'll see if I can find something to put in its place then because I dont really like it. Maybe I'll make a GPS holder to put in there.

Later: Wow, that was actually pretty easy I just never tugged enough to pull it out. But now I'm really curious as to why a coin holder needs a wiring harness?

-

I'm thinking about getting my wire tester and seeing if they are actually hot.

Punisher · #2 Tue, February 9th, 2010, 10:55 PM

The wiring harness is for the 4WD control on vehicles equipped with 4WD.

***Longshot270*** · #3 Tue, February 9th, 2010, 11:10 PM

Quote:

Originally Posted by Punisher

The wiring harness is for the 4WD control on vehicles equipped with 4WD.

Dang, I was hoping it was for a built in vending machine.

XPerties · #4 Sat, March 6th, 2010, 09:07 AM

Quote:

Originally Posted by Punisher

The wiring harness is for the 4WD control on vehicles equipped with 4WD.

Correct but also incorrect. I have a 4x4 but I have a manual 4x4 with 4x4 shifter on the floor. I have the coin holder as shown in the picture so this mod isn't just for 2WD only.