![]() |
|
2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
![]()
Again, when I get questions about leaving the end of the tube open, I always end up going back to the 60's & 70's cars that had air cleaners with the snorkel that barely made it past the valve covers.
From a performance aspect, cooler air is always more desirable than warmer air. Although, like Jack, I wonder just how much warmer the air really is getting in the intake tube when blasting along at 70 MPH. This would be an easy thing to validate since the programmers have ACT in the PIDS. If it was less than 10º difference, I'd wonder just how necessary it really is to complete the tube connection to the fender. As for CAIs, there's no question they're drawing some amount of warm air from under the hood. Again, a quick check of the ACT before and after installing will give you the final word.
__________________
Bill Cohron - The Mad Doctor ![]() ![]() ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Much to my surprise, I'm actually quite enjoying Linux! ![]() |
Tags |
dwv intake mod |
|
|