![]() |
|
Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
If i order an Phoenix 6 position for my truck is ther gonna be a problem with having an adjustable wastegate controller such as the Turbo Master thats not fed boost by the pcm to overcome the spring pressure like the factory wastegate does? Would it be better to replace my factory wastegate controller with another factory one?
![]() |
#2
|
||||
|
||||
![]()
Just limit max boost to around 20-24 psi, and you will be fine.
|
#3
|
|||
|
|||
![]()
I have the turbomaster. With 120 race tune the best I got was 22.8 on boost.(with stock injectors) If you exceed 24 and get a SES light, go to dieselsite and by the BRV+ it will block overboost to your map. Only fifty bucks, and SIMPLE to install. Or open up the spring a little on your turbomaster.
![]()
__________________
2003 F250 7.3 PSD CC SB FX4 DP Tuner F6, 160/80 Sticks, Diamond Eye 4 Inch Exhaust, AFE Stage II Intake, DieselSite:Turbomaster Wastegate Control, AIH Delete, BRV+, Intercooler and Engine Boot Kit |
#4
|
|||
|
|||
![]()
Anyone want to tell me how to get in touch with these people? i want one of their chips but i cant get them in email, PM, or phone. That wouldnt be good if for instance the truck went down after the chip got in it. . .
|
|
|