|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, March 9th, 2010, 04:23 PM
|
|||
|
|||
The bottom question has nothing to do with the chip just wondering if I could get your help on that one.
Im going to pull the computer out and clean the connections better. How clean should I go? |
|
#2
Tue, March 9th, 2010, 04:34 PM
|
||||
|
||||
|
Cleaning the contacts:
http://forum.gopowerhungry.com/phoen...ol-module.html As far as the "lopey cam" sound, is it a situation that causes a "ruh-ruh-ruh-ruh" sound (say "ruh" just a tad faster than once a second)? If so, it's almost a normal characteristic when it's below 30 degrees outside and if you're using 15/40 oil. It should only last a few seconds though. If it's a rhythmic miss, check the exhaust while it's doing it....any white smoke that smells like raw fuel?
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#3
Tue, March 9th, 2010, 07:07 PM
|
||||
|
||||
|
which tunes did you get on your chip??? do you have any mods beside the chip? Definitely clean your contacts again...
__________________
DJ Phoenix (my modded) Hi-1200/240Tow/75FS/80DD/100/140SS +Minotaur ASE Master Auto Technician  2001 Ford Excursion 7.3 4x4 Projects. 1970's Hustler and Max II Amphibious ATV's |
|
|
Hybrid Mode
