Display/Screen Info. Intermittent

***88Racing*** · #1 Fri, March 19th, 2010, 12:27 AM

Use the battery voltage pid to see what the voltage is doing.
These things start to do funny things before the battery goes.

bambo2888 · #2 Fri, March 19th, 2010, 11:32 AM

Quote:

Originally Posted by 88Racing

Use the battery voltage pid to see what the voltage is doing.
These things start to do funny things before the battery goes.

Nope, battery seems fine. 14. running, and 11. or so cranking.

bambo2888 · #3 Fri, March 19th, 2010, 08:02 PM

any ideas? problem is still intermittent!

***Longshot270*** · #4 Fri, March 19th, 2010, 08:48 PM

you might have a loose connection somewhere. Probably on the lower end of the cable where it plugs into the OBDII port.

bambo2888 · #5 Fri, March 19th, 2010, 11:04 PM

Quote:

Originally Posted by Longshot270

you might have a loose connection somewhere. Probably on the lower end of the cable where it plugs into the OBDII port.

seems to be a firm connection. likewise, every time that I noticed the frozen parameters, i reach down to confirm the connection between the obdII and the gryphon and nothing changes. the second I press MENU though, the parameter return to their correct values.

***Longshot270*** · #6 Sat, March 20th, 2010, 12:53 AM

Try checking the truck's wires that go into the port maybe. Which PID's are you watching?

bambo2888 · #7 Sat, March 20th, 2010, 07:56 AM

Quote:

Originally Posted by Longshot270

Try checking the truck's wires that go into the port maybe. Which PID's are you watching?

I examined the connections at both the port and the gryphon, and it all looks fine. I have been watching Speed/Inst MPG/CHT/TFT. I just changed CHT to Battery Voltage to monitor that, as suggested above.