![]() |
|
F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
i was wondering if its possible to get a 140 horse tow setting? right now im able to drag 17000lbs in 140 with no problems but im worried about the transmisison settings and such. thanks in advance.
brian |
#2
|
||||
|
||||
![]()
In all honesty, I believe that the race/extreme settings are very similar to the tow settings as far as the shifting strategies go.
However, towing 17K with an extra 90-100 HP (unless you have other modifications, you aren't seeing anywhere near 140 extra HP) isn't really the best thing you can do for the rest of your drivetrain (namely the transmission and rear axle). There is a very knowledgable person who used to frequent the Powerstroke Nation forums that is a very intelligent guy. He found out that towing heavily with 300 RWHP on tap stresses the rear axle horribly because the parts simply are not big enough and too much heat is generated in the fluid. I don't think that he was towing more than 17K when he toasted the ring and pinion either. I'm sure Bill could line you up with something but I would strongly recommend NOT doing it.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#3
|
||||
|
||||
![]() Quote:
![]() I am just surprised that anyone can tow 17k in a race tune with no issues. ![]() I agree with Cleatus, not the best thing for the rest of the truck! |
#4
|
|||
|
|||
![]()
all you need to add is a Dana 135! 13 qts of 90wt oil goes along way to keeping things cool!
Barney 02 F550 tow bully |
|
|