|
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Fri, June 4th, 2010, 05:19 PM
|
||||
|
||||
Does the pipe that goes into fender need to go through BOTH holes or just the first one?
|
|
#3
Fri, June 4th, 2010, 07:18 PM
|
||||
|
||||
|
Yea, Gotts says atleast 2 inches so that's what I'll try to do. Ugh! Getting the pipe right is a pain. Giving up for the day. Get back at it tomorrow.
|
|
#4
Sat, June 5th, 2010, 02:52 AM
|
||||
|
||||
|
I think the reasoning is because you can suck up leaves if it only makes it past the first hole.
__________________
|
|
#5
Sat, June 5th, 2010, 11:40 AM
|
||||
|
||||
|
Done! I think . Probably just jinxed myself
 . But pipe fits through both holes pretty dang snug(had to use WD40 to get it back out after test fit lol ). Cleaned it up and got it all smooth. Hit it with a quick coat of black paint just incase any of the pipe ends up showing. Let that dry for a while and its on to reassembly.I've had the battery disconnected this entire time. Is that right? Reconnect after I get it all put back together? Any special steps to do so the comp "relearns" or whatever? Rob
|
|
#6
Sat, June 5th, 2010, 11:48 AM
|
||||
|
||||
|
You didn't need to unhook it for this but it doesn't really matter. Post some pics so we can see when your done.
__________________
|
|
#7
Sat, June 5th, 2010, 11:53 AM
|
||||
|
||||
|
Will do.
Also cleaned my K&N filter and it's supposed to dry for a day. But thats under normal temps I think. It's in the hundreds here so it shouldn't take but a couple hours. 
|
|
|
|
Hybrid Mode
