Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Minotaur Automotive Tuning Software

Minotaur Automotive Tuning Software
Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here.

Also, check out our Facebook group: Facebook - Minotaur Tuners


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old Sun, June 13th, 2010, 03:55 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Oh... Yeah....
Put the stock map back in there. Your IPR duty cycle base map is WAY too high at an idle (3-4 MPa). Big oil should love that stock map!

The thing that really bothered me about "brand-x" tuning was the IPR duty cycle would cause a HUGE dip in RPM once the transmission downshifted and the engine dropped to an idle at 35 MPH. This was simply due to the high IPR duty cycle and the lag time required for the PCM to decide that the base duty cycle was way too high to maintain 600 PSI once the RPM dropped quickly.

Put the stock map in your programming. Your truck will thank you.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:36 AM.


All Contents Copyright 2008-2024, Power Hungry Performance