|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#14
Wed, June 23rd, 2010, 11:18 AM
|
||||
|
||||
If you unplug the cable form the OBDII port and reconnect (which I assume you're already doing), are you still getting the "Connecting to Bridge" error? This is nearly always an indication of a failed/failing PC board in the cable and will require replacement of the cable.
Out of curiosity, have you had any starting/battery issues recently? More often than not, the cable will fail after having to have the vehicle jumped or some other low voltage incident. If the error persists, let me know (e-mail or phone) and we'll arrange to have the cable replaced. Take care.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Threaded Mode