|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Wed, June 30th, 2010, 07:13 AM
|
||||
|
||||
switching trucks
I found a smoking deal on a FU chip and I was wondering what all needs to be down to run it in my 97. The chip is comming out of a 02. Do I have to send it in to get redone or just run it how it is?
__________________
1997 Ford F-350 RC LB ZF-5 Speed |
|
#2
Wed, June 30th, 2010, 09:57 AM
|
||||
|
||||
|
You will need to contact us with the previous owner's name and we will have to change the calibration set to match your truck's PCM family.
We will also need to register the PhoenixFlash software to your computer.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#3
Thu, July 1st, 2010, 02:04 PM
|
||||
|
||||
|
How much is that going to cost if anything?
__________________
1997 Ford F-350 RC LB ZF-5 Speed |
|
#4
Thu, July 1st, 2010, 02:30 PM
|
||||
|
||||
|
Edited due to improper information.
Corey just set me straight. 
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#5
Thu, July 1st, 2010, 02:35 PM
|
||||
|
||||
|
Alright when i get it I will call and get it all switched.
__________________
1997 Ford F-350 RC LB ZF-5 Speed |
|
#6
Sat, July 3rd, 2010, 04:55 PM
|
||||
|
||||
|
Ok I can spare $50 to get it redone, but then when I upgrade to stage 1s is there more money involved?
__________________
1997 Ford F-350 RC LB ZF-5 Speed |
|
|
Linear Mode
