|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Fri, July 23rd, 2010, 11:32 AM
|
||||
|
||||
It sounds very much like they flashed your PCM. Probably had to if they rebuilt/replaced your transmission. And, don't worry about the codes - yet.
Bring your Gryphon to your PC, fire up Pegasus and connect the Gryphon. Once it reports it is connected, click on [Updates]->[Gryphon Update Manager]. This will show the firmware and calibration updates that are available. You want to install BOTH. This will return your Grypohon to a "canned" status, and it should recognize your truck's PCM now. With the ignition key ON, plug it back in and note the HEX code. If it's different than the one in your User Profile, you've been flashed. To get your custom tunes back, Bill will have to rewrite them for the new hex strategy. But, you can run your truck on the canned tunes while you're waiting. If the hex code is the same though, try downloading your custom tunes again: [Updates]->[Custom File Download] or [Updates]->[Download Targeted Functions], depending on your version of Pegasus, and try them again. And, I would expect a few codes if a lot of work was done. The truck has to relearn a lot of things. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#2
Sun, July 25th, 2010, 05:26 PM
|
|||
|
|||
|
Hey, THANKS A LOT! I am going to try your suggestions RIGHT NOW!... Let you know how things work out. THANKS again!
|
|
#3
Sun, July 25th, 2010, 06:19 PM
|
|||
|
|||
  It worked! And boy am I glad! I guess I was taking the Gryphon for granted. Because I forgot just how much of a DOG my truck is WITHOUT it. The other day, I went to pass a car, and when I hit the pedal it just boggggeeddd. Now... it is like night and day. Sooooooooo glad it all worked out. Now hopefully this tranny fix will hold up! Thanks again!!
|
|
#4
Sun, July 25th, 2010, 07:39 PM
|
||||
|
||||
|
Don't forget, you can run the canned tunes now. I'd suggest you use the Level 2 tow tune (even if you're not towing). You'll get much improved transmission behavior and more low end power.
- Jack |
|
#5
Sun, July 25th, 2010, 07:52 PM
|
|||
|
|||
|
Oh I got the customs back. The Hex was the same. So I did like you said, and reloaded them on the Gryphon...hooked it back up and...presto...no problems!
|
|
#7
Mon, July 26th, 2010, 08:18 PM
|
|||
|
|||
|
Do you think that it could have been me plugging in the Gryphon to the truck, before I turned the key on??
|
|
|
Hybrid Mode
