|
|
|||||||
| 1994½ to 1997 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped F-Series and F-Super Duty. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Wed, August 11th, 2010, 12:13 PM
|
|||
|
|||
idle question
i am filling out the order form for the FU chip and it askes what my desired idle RPM is. what is a good one to choose? i have a 97 psd
|
|
#2
Wed, August 11th, 2010, 12:21 PM
|
||||
|
||||
|
Stock. If it's fine where it is, then you don't need to put anything.
If you think it should be a bit higher or lower, you can let us know.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
#3
Wed, August 11th, 2010, 12:25 PM
|
|||
|
|||
|
Quote:
|
|
#4
Wed, August 11th, 2010, 12:44 PM
|
||||
|
||||
|
Depending on the PCM code, the idle can vary a bit. Most are set at about 580 when warm. You can probably just leave that field blank.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
|
|
Linear Mode
