|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#4
Fri, September 3rd, 2010, 02:48 AM
|
||||
|
||||
Have you checked ICP under load?
Low ICP will cause the fuel to be injected at a lower pressure and will not atomize correctly. This will give you an inefficient burn resulting in black smoke. Borrow some type of scanner or make a mechanical gauge to check it. If it will not hold 2800-3000 psi more than likely your pump is weak, or you have an HPO leak. |
|
|
Threaded Mode