![]() |
|
1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
|
Thread Tools | Display Modes |
#23
|
||||
|
||||
![]()
Does anyone have a link to a wiring diagram for the junction block above the drivers side valve cover? I am looking for one that will tell me which wires run to the injectors, to test them.
Sicks-0, First thank you for all your help. Why am I getting a P0475 and P0476 code in the computer? What is this pressure valve? Now I am not getting the boost that I used to either, and the truck is consistently getting worse, as far as running and power. KOER: P0476 Exhaust Pressure Control Valve Range/ Performance KOEO: P0475 Exhaust Pressure Control Valve Just a thought, but if my EBPV sticks when I am warming the truck up, it will smoke and have no power. Could this be a problem, and defueling the truck? Or would that not have an effect on the buzz test? (Probably not but just a 4 am thought that ran through my head when I quit working on it last night) Again thank you all for your help.
__________________
Thank you and have a great day, Troy Detweiler I have a '99 F 250 7.3L Diesel w/ a 6 speed Tranny and 4x4. Mods: Amsoil dual bypass oil filters, Amsoil air intake mod DIY, fuel preasure spring mod(70psi), FU Chip and Burner , 3.73 rear gears, leveling kit (DIY), Stabilizer bars on the rear axle (DIY). '02 F 350 7.3L, 6spd,4x4,CC, Dually- Just bought 4-15-11 |
|
|