|
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
 |
|
|
Thread Tools | Display Modes |
|
#11
Thu, August 19th, 2010, 10:06 PM
|
||||
|
||||
My truck seems to have developed a similar issue as well. When it sits idle for a few seconds, it drops and "shakes" ever so slightly and then idles back up. This just started a week or 2 ago.
|
|
#12
Wed, September 29th, 2010, 07:21 PM
|
||||
|
||||
|
Rob, Clean your MassAirFlow Sensor first. I konw you're dumping a oil/gauze filter and that could be the problem. The oil will dirty up the MAF and cause rough idle issues. If that doesn't fix it dig deeper.
David
__________________
'05 F150 FX4 Flairside 2" AS Leveled DI/DO 50 Series Flowmaster Gotts Mod Intake (my version) 295/70/18 Terra Grapplers Wish List Gryphon Programmer/Custom Tunes Firestone air bags Wheels Gears
|
|
#13
Wed, September 29th, 2010, 10:15 PM
|
||||
|
||||
|
It's gone. Just eventually went away.
|
|
#14
Wed, September 29th, 2010, 11:32 PM
|
||||
|
||||
|
Check the other thread. Posted the MAF cleaning link.
David
__________________
'05 F150 FX4 Flairside 2" AS Leveled DI/DO 50 Series Flowmaster Gotts Mod Intake (my version) 295/70/18 Terra Grapplers Wish List Gryphon Programmer/Custom Tunes Firestone air bags Wheels Gears
|
|
#15
Wed, November 3rd, 2010, 08:45 PM
|
|||
|
|||
|
Take off your throttle body ( four bolts) and clean it out you'd be suprised how dirty it gets, clean it with some carb cleaner and some rags, and also while your at it take some brake cleaner(electrical cleaner) to your maf sensor ,thats it let it all dry , reset your pcm with a tune, and you should be good
|
|
#16
Sat, November 6th, 2010, 12:02 PM
|
||||
|
||||
|
Quote:
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#18
Mon, November 8th, 2010, 02:39 PM
|
||||
|
||||
|
The biggest concern is not so much what you use, but that you either remove the throttle body before you clean it or use a rag sprayed with cleaning solvent to clean the throttle body. What you DO NOT want to do is spray solvent down the intake. Most of the manifolds are plastic nowadays and the solvent will not be very friendly.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
|
Linear Mode
