|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
|
|
Thread Tools | Display Modes |
|
#4
Tue, December 14th, 2010, 09:54 AM
|
||||
|
||||
The only reason I don't recommend adjusting the idle on a rollback program is that it can sometimes interfere with a programmer. For example, an Evolution will read the file and calculate the checksum on the file to make sure that the file is 1) Valid and 2) Unmodified. Some programmers do this and some don't, and I believe SCT is one of those that don't so if you'd like to have the idle pre-modified I'd be happy to include that for you.
As for the FICM, the device is pre-loaded with both IH and non-IH strategies so you can chose which one will work best for your vehicle. Most folks will try and use the non-IH strategies first and if they have a cold start problem they will switch over to the IH strategy instead. I hope this helps.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Threaded Mode