![]() |
|
Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Thank you so much you guys for your e-mails. I've been spending WAY to much time on this stuff lately!
![]() |
#2
|
||||
|
||||
![]()
ok got a question didnt see a need to start a new thread. when tuneing a trans whats the main things you use to adjust it.
is it rpm vs speed? i would think thats most of it? and is it you set a sertan shift point how does the trans know to shift difrent say at WOT,or just creeping up speed slow? is it a calculation the pcm makes? |
#3
|
||||
|
||||
![]()
Shifting is determined by comparing APP (pedal position) and MPH.
So basically the harder you press the go pedal - the longer it will take to shift. When you are WOT, it will shift at a preset maximum RPM - which you can change. If you want to adjust the quickness/firmness of a shift there is a whole slew of different ways to do it. |
#4
|
|||
|
|||
![]()
THis is getting interesting very fast.... I cant wait!
__________________
96' f350 on 35's stage 1's, custom tuned, built tranny, IC, modded IDM |
![]() |
|
|