|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, January 13th, 2011, 03:05 PM
|
|||
|
|||
Try the oil pressure cross over line.... $65 and 30min to install. It balances out the oil pressure on each side of the block. I've heard that it quitens the engine some and has even fixed some idle issues. I'm going to buy it in about a week to see if it fixes my lopey idle.
it can be purchased from sinister diesel http://www.sinisterdiesel.com/other/...structions.pdf
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx 
|
|
#2
Thu, January 13th, 2011, 08:05 PM
|
|||
|
|||
|
I will check that out. I am replaceing the cam position sensor with the original black one. I got it fron dieselorings.com I hope it fixes the idle. I would imagine that the gray sensor has well over 100,000 miles on it. I just got it going to hook it up later.
Black, Grey, & Dark Blue Cam Position Sensor Perdels Test - Diesel Forum - TheDieselStop.com Here is the site I got info from may be your idle issue also.
|
|
#3
Fri, January 14th, 2011, 08:57 AM
|
|||
|
|||
|
Well the sensor did not fix the problem poop! I am about ready to pull the injestors and make sure there are no problems underneath and check the torque . Im running out of stuff to do.
|
|
#4
Fri, January 14th, 2011, 11:18 AM
|
|||
|
|||
|
Quote:
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
|
|
#5
Fri, January 14th, 2011, 10:01 PM
|
|||
|
|||
|
Ok I drove the truck to work. The idle is better but is still there. I sat at raleys for fifteen minutes and it idled perfect. It like slips into a bad idle then slips out. It's really weired.
|
|
#6
Sat, January 15th, 2011, 04:49 AM
|
|||
|
|||
|
VIDEO0016.mp4 video by epowers777 - Photobucket
Ok here is a better video! Let me know what you think!
|
|
#7
Tue, January 18th, 2011, 12:54 AM
|
|||
|
|||
|
Anybody?
|
|
#8
Tue, January 18th, 2011, 04:01 PM
|
|||
|
|||
|
I dont have audio on my work computer.
Here's my exhaust idle sound: YouTube - 7.3 exhaust Sound familiar?
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
|
|
#9
Fri, January 21st, 2011, 07:29 AM
|
|||
|
|||
|
Mine sound just like yours but worse. What oil are you running?
|
|
#10
Fri, January 21st, 2011, 10:01 PM
|
||||
|
||||
|
No clue without being there, Eric.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
|
|
Hybrid Mode
