|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Wed, February 9th, 2011, 09:52 PM
|
||||
|
||||
The only way to know is to try and figure out where your extra resistance is, could be a bad injector solenoid, UVCH/ or connector, bad connection or pushed out pin in the main engine harness connector, or a break/ corrosion in that one wire(white/pin 22).
I would ohm out that injector circuit right at the cover gasket and see if it is on that side of the harness before going any further. 
|
|
#2
Thu, February 10th, 2011, 04:41 AM
|
|||
|
|||
|
Dave I want to apologize for my bad typing. The under the valve cover harness tested bad.
So just get a new under the valve cover harness? Just a reminder the pop test came back good all injectors popped strong. All the pins tested good except the 22 pin (white wire) on the uvch.
|
|
|
|
Hybrid Mode
