|
|
|||||||
| 1997 to 2003 F-150 4.2L, 4.6L, and 5.4L equipped F-150s. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Thu, April 14th, 2011, 11:08 AM
|
|||
|
|||
Still waiting for my tune
So- how long do I have to wait for my tune? bought a CS on 12/22 turned in my hex code a few weeks later and waited- called about 6 weeks ago and it was supposed to be done and awaiting to be built and sent out later in the week. Now I cant get anyone on the phone and no emails get returned. Sick of my truck running like it is and would like to get my tune installed and get it up and running right.
|
|
#2
Thu, April 14th, 2011, 11:15 AM
|
||||
|
||||
|
You should have had it by now. It's possible that your hex code was never received by PHP.
Please do us all a favor and complete the information in your User Profile. That way, Cody can check on your status and see where the problem is. In particular, they need your hex/calibration code, Serial Number and a phone number where you can be reached there. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
|
|
#4
Thu, April 14th, 2011, 07:36 PM
|
||||
|
||||
|
Quote:
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#5
Thu, April 14th, 2011, 10:19 PM
|
||||
|
||||
|
Are you referring to the HEX code?
I haven't placed my order yet. Just wanted to know the approximate time it takes to recieve the CTS and then to actually have the custom tunes ready. I may be out in June so I'd like to have everything ready by then. Hopefully I'll be able to place the order tomorrow morning. Do you order the dash pod separately or does the order form offer it to you?
__________________
|
|
#6
Fri, April 15th, 2011, 12:15 AM
|
||||
|
||||
|
Quote:
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#8
Fri, April 15th, 2011, 11:51 AM
|
|||
|
|||
|
everything is updated- so hopefully I hear something soon!
|
|
#9
Fri, April 15th, 2011, 05:58 PM
|
||||
|
||||
|
It turns out that the files were done on 3/1, but that's when I was still working remotely from my home 2000 miles from the office. Lost in translation? Most likely. I will simply have Bill compile them and get you stuck on the server.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
#10
Fri, April 15th, 2011, 11:54 PM
|
|||
|
|||
|
Thanks Cody
I know when I talked to you to confirm my hex code and everything else was ok you said You had it Done and bill should be finishing it and uploading to fusion at the end of the week. The issue before was my email got lost during bills vacation time. Just hope I Get it soon! Last edited by haten'chevs; Sat, April 16th, 2011 at 08:20 AM.
|
|
|
|
Linear Mode
