|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Tue, April 19th, 2011, 08:16 PM
|
|||
|
|||
Help!!!!
i have the pheonix burner and chip and have reburnt my chip 4 times with no problems. then today i went to update tunes and it says my software is out of date, so i went on and downloaded the new pheonix software. but now after i select tunes and the pop up says place in position 1, i press ok, and an error comes up that says the chip is not formated. it says check in utilities and see if the multi chip authorization s FC but mine is FF.
__________________
2000 Powerstroke (PMT1) 4x4 auto XCSB |
|
#2
Tue, April 19th, 2011, 08:28 PM
|
||||
|
||||
|
Look into the burner (where the chip plugs in) and see if the small white power relay has been knocked off of the board.....common problem with "sprightly" chip installation into the burner.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! |
|
|
Linear Mode
