Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
  #1  
Old Wed, April 27th, 2011, 08:36 AM
BigSur BigSur is offline
Scientist
 
Join Date: Feb 2010
Location: Hampton, VA
Posts: 109
BigSur will become famous soon enoughBigSur will become famous soon enough
Default Sputtering Issue

I wanted to follow up on this issue to see if those of us that were having the problem have found a resolution. I know many of us running the 87 performance tune were experiencing this. My problem as of recent almost ALWAYS occurs once my tranny falls into OD....engine starts sputtering like I'm not getting enough fuel.

The main purpose of my post is to follow up with a question. I recently received an update. So far...so good. However, I noticed one major difference in the tune....the tranny now falls into OD around 40 mph, where originally, it fell into OD around 50 mph (with the original custom perf tune). Is it likely that was part of the change to eliminate the performance issue? I'm not necessarily dissapointed with that characteristic, as I seem to get better mpg's when I'm in OD more often.

Also, I noticed when I changed back to my canned tow tune temporarily that my acceleration was WAY better in the mid to high range. Overall, the truck seemed more responsive. Seems like that has been lost with the performance tune. Any suggestions? I've read to clean the throttle body and MAF sensor? Problem is I have very little knowledge in that area; don't know how to do it. I'm a Scientist, not a mechanic

Thanks in advance guys.
  #2  
Old Wed, April 27th, 2011, 11:48 AM
ticopowell's Avatar
ticopowell ticopowell is offline
Grown-up in training!
 
Join Date: Oct 2009
Location: Currently in Tampa FL
Posts: 863
ticopowell will become famous soon enough
Default

, there are a few articles, some on here, some on other forums, going into good detail on how to clean your MAF and throttle body. I dont have any links to them, but a quick search will do the trick. Make sure to take them both out of the truck when you clean them, and be sure to use the right chemicals when you do it. Electrical contact cleaner for the MAF and they have throttle body cleaners at most car parts stores... at least to the best of my knowledge.
  #3  
Old Thu, April 28th, 2011, 03:12 PM
BigSur BigSur is offline
Scientist
 
Join Date: Feb 2010
Location: Hampton, VA
Posts: 109
BigSur will become famous soon enoughBigSur will become famous soon enough
Default

Working with Cody on all of the above. Hopefully I don't have to clean anything
  #4  
Old Thu, April 28th, 2011, 08:05 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

Quote:
Originally Posted by BigSur View Post
Working with Cody on all of the above. Hopefully I don't have to clean anything
Cody's a good guy! I'm confident he'll get your problem resolved.

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
  #5  
Old Fri, April 29th, 2011, 12:48 AM
88Racing's Avatar
88Racing 88Racing is offline
SENIOR MODERATOR
 
Join Date: Feb 2009
Location: Somewhere ....
Posts: 4,241
88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light
Default

Quote:
Originally Posted by BigSur View Post
Working with Cody on all of the above. Hopefully I don't have to clean anything
Why not clean?
Your truck deserves it....
And it helps!
__________________
SENIOR MODERATOR--PTLA

God doesn't have a Facebook but he's my friend.
God doesn't have a twitter, but I follow him.
  #6  
Old Fri, April 29th, 2011, 09:17 AM
BigSur BigSur is offline
Scientist
 
Join Date: Feb 2010
Location: Hampton, VA
Posts: 109
BigSur will become famous soon enoughBigSur will become famous soon enough
Default

Quote:
Originally Posted by 88Racing View Post
Why not clean?
Your truck deserves it....
And it helps!
I think I will. My mechanic at my dealer is going to walk me through how to do it for FREE.....that way, I know how to do it in the future. I COULD read and learn, but time is always an issue for me. I was surprised they offered that to me; I'm going to take them up on it.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:46 AM.


All Contents Copyright 2008-2024, Power Hungry Performance