|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Tue, June 28th, 2011, 12:22 PM
|
|||
|
|||
Standard calibration ok with mods?
I have a '96 automatic with a 3" downpipe, 4" exhaust, no cat, cold air intake, and gauges. I'm in the process of upgrading the HPOP to a Terminator 17 degree and having the injectors rebuilt by Rosewood to Stage 1's. My question is will the standard calibrations work ok with these mods? I just ordered my chip from Kenny at KT Performance and I got:
Whisper High idle 1200 40 hp tow 65 hp tow 65 dd 80 performance |
|
#2
Tue, June 28th, 2011, 12:39 PM
|
||||
|
||||
|
The standard calibrations will work with those modifications. You won't experience any power gains over the stock injectors though.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#5
Thu, July 28th, 2011, 09:08 AM
|
||||
|
||||
|
KT Performance sells chips with our calibrations, yes.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
|
Linear Mode
